The XCAN-AC collects analog information from an AC generator for broadcast on the J1939 CANbus. Upon power up, the module broadcasts AC VOLTS, AMPS, FREQUENCY, PHASE ANGLE, KW, POWER FACTOR, KVA and TOTALIZING KWH.
The XCAN-DC collects analog information from a DC generator for broadcast on the J1939 CANbus. Upon power up, the module broadcasts DC VOLTS and AMPS.
The XCAN-IO-644 is a configurable input/output (I/O) module that communicates analog and digital inputs to J1939 format AND provides J1939 command of relay outputs.
The XCAN-10R is a 10 relay module with each relay controlled by a J1939 CANbus command. J1939 commands sent over the CANbus to the XCAN-10R turns assigned relays ON and OFF.
The XCAN-420S is a 4-20mA repeater. A single 4-20mA input signal is repeated into four 4-20mA output signals.
The XCAN-ECU collects analog sensor data including Engine Speed, Oil Pressure, Engine Temperature, Fuel Level, and Battery Voltage from a mechanical engine for broadcast on the J1939 CANbus.
The XCAN-A10 collects up to 10 analog inputs for broadcast on the J1939 CANbus.