Controls, Inc. has added a real-time clock and integrated scheduler into the C Series engine display and control product line. Engine start and stop is now incorporated into the engine control panel. Simply select the dates and times to start…
The XTRAN module takes transmission temperature and pressure information collected from sensors and communicates it over the J1939 CAN Bus.
The MVP Series provides complete engine display on a signal screen in a gauge sized unit (less than 4″ diameter) installs into a 2″ hole. It was released for sale during the 1st quarter of 2013.
Controls, Inc. has released the 4600 Series panel for marine applications. These dash mount panels include the M Series display unit, engine gauges, key switch, and alarm horn. Transmission oil pressure and temperature gauges are optional. The 4600 series panels…
June 2012 – Controls, Inc. has released a full line of J1939 engine gauges including tachometers, oil pressure, engine temperature, battery voltage, transmission oil temperature and transmission oil pressure. These are traditional style gauges for all J1939 engines.
Controls, Inc. has released the 8500 and 9500 Series genset panels. They combine the C Series engine display unit with analog meters for volts, amps and frequency. The 8500 Series comes in a NEMA 4X enclosure with clear door that…
Controls, Inc. has released a full line of generator meters for voltage, amperage and hertz. These are traditional meters available for individual purchase or as part of a complete genset panel.
Controls, Inc. has released the C4 product series (engine control) and G4 product series (generator control) for tier 4 engines. Both the C4 and G4 products are based on the uCAN platform and include functionality required for tier 4 engines…
The G3 product series for generator control has been released. When installed with the xCAN-AC module, it provides complete generator and engine monitoring for J1939 engines. Multiple G3 display modules can be installed on an application. The G3 display can…
September 2010 – The xCAN-AC module is combined with the G3 display for a complete generator and engine monitoring solution for J1939 engines. The xCAN-AC module takes the generator information collected and communicates it over the J1939 CAN Bus where…
