Control Products and Solutions

Engine, Generator & Equipment Controls

HOME    |     SERVICE & SUPPORT    |    CONTACT  

C SERIES

J1939 Engines

CM SERIES

Mechanical Engines

EMT3 SERIES

J1939 Engines

EMT1 SERIES

Mechanical  Engines

G SERIES New

J1939 Engines

JCAN SERIES

J1939 Engines

GMPLUS SERIES

Mechanical Engines

M SERIES

J1939 Marine Engines

G SERIES

J1939 Marine Gensets

Cycle Timer

Cycle Timer +

Fuel Circulation

TM SERIES

XCAN

Analog to CAN bus

XCAN-AC

Generator to CAN bus

 XCAN MODULE

Description

The XCAN-AC generator to CAN bus module collects analog input signals from the generator then converts and broadcasts the data onto the SAE J1939 CAN bus.  Use the XCAN-AC module in conjunction with the Controls, Inc. G Series display units for complete engine and generator monitoring.

The XCAN-AC module installs into the generator end isolating all high voltage circuits.  Upon power-up, the module broadcasts AC Volts, Amps, Frequency and Phase Angle onto the Can bus.  In addition, parameters such as KW, Power Factor, KVA and Totalizing KWH are calculated and broadcast for viewing on the G series display..

Application engineers are available to assist with product selection.

CALL: 

330.239.4345

EMAIL:  

 sales@controlsinc.com

XCAN-100 MODULE

RUGGED, WATER TIGHT ENCLOSURE

WATER TIGHT CONNECTORS

RELIABLE

SIMPLE INSTALLATION

MOUNTS INSIDE GENERATOR END

ISOLATES HIGH VOLTAGE

Spec Sheet

Home  |  Terms of Service  |  Privacy Policy  |  Dealer/Distributor Opportunities

Copyright © 2011 Controls, Inc.  All Rights Reserved.