Controls Incorporated - Control Products and Solutions

Control Products and Solutions

Engine, Generator & Equipment Controls

HOME | SERVICE & SUPPORT | CONTACT

C SERIES

J1939 Engines

CM SERIES

Mechanical Engines

EMT3 SERIES

J1939 Engines

EMT1 SERIES

Mechanical Engines

G SERIES New

J1939 Engines

JCAN SERIES

J1939 Engines

GMPLUS SERIES

Mechanical Engines

M SERIES

J1939 Marine Engines

G SERIES

J1939 Marine Gensets

Analog to CAN bus

XCAN-AC

Generator to CAN bus

DIGITAL CYCLE TIMER

Digital, microprocessor-based timer module that provides a relay output on/off signal for any application requiring unattended operation based on a predetermined cycle schedule.

This module provides a start and stop signal based on the selected cycle schedule. The module goes into a sleep mode during operation to minimize current draw. The display turns off and a blinking red lamp indicates sleep mode status. The unit wakes as the next engine start cycle or when a button is pressed.

Applications include irrigation, well pump control or any equipment that runs on a daily cycle schedule.

Simply set the cycle schedule and the module will send a contact closure signal for start and a open contact signal for stop.

FEATURES

• Large, easy-to-read display with 1/2" characters

• 12VDC

• Simple operation (See Spec Sheet & Operating Instructions for details)

• Durable, sealed, weather tight enclosure

• Manual mode for start and stop

• Sleep mode for minimum current draw

• Harnesses are available

Cycle Mode Armed