TIMER CONTROL MODULE 

P/N C3-104

Digital, microprocessor-based timer module that provides an output on/off signal for any application requiring unattended on/off based on runs per day.  Applications include irrigation, well pump control or any equipment that runs on a daily schedule.  

Simply set the schedule and the module will send a contact closure signal for start and a open contact signal for stop.

FEATURES

 • Large, easy-to-read display with 1/2" characters

 • 12VDC

 • Simple operation (See Spec Sheet & Operating Instructions for details)

 • Durable, sealed, weather tight enclosure

 • Manual mode for start and stop 

 • Sleep mode for minimum current draw

 • Harnesses are available

Cycle Mode Armed

SET UP

Set up is simple.  Just select the following parameters.

1) Cycles per Day (# of starts per day)

2) Run Duration (Engine run time)

3) Run Days (Days of week engine is run)

4) Cycle Window (Period of time during day when scheduler is active)

Manual Mode (Manual On/Off)

EXAMPLE (See spec sheet or instructions for Time Table)

• 8 starts per day

• 30 minute run time

• Cycle window = 9:00am to 5:00pm

• Operate Monday through Friday only

BACK TO HOME

HOME PAGE

J1939 ENGINE CONTROL

EMT3 Series

uCAN Series

MECH ENGINE CONTROL

EMT1 Series

iMECH Series

J1939 GEN CONTROL  

JCAN Series

Retro Fit Kits

MECH GEN CONTROL  

GMPLUS Series

Retro Fit Kits

EQUIPMENT CONTROL

Overview

Application Specific

Control Solutions

Level & Pressure

TIMER CONTROL

Timer Module

Timer & Engine

Fuel Circulation

DAY TANK CONTROL

REMOTE MONITORING

HARNESSES

ACCESSORIES

Timer Control

Spec Sheet

Click on image  to download

Operating Instructions