|
|
|
|
 |
 |
 |
 |
 |
|
|
TIMER & ENGINE CONTROL (All-in-One Module) P/N C3-102 Digital, microprocessor-based controller for off-highway engines requiring unattended start/stop based on a predetermined schedule on runs per day. This all-in-one module includes the scheduler, engine auto start/stop and engine safety shutdowns in one simple module. Applications include irrigation, well pump control or any equipment that needs to be run on a daily schedule. Simply set the schedule and the module will start, stop and monitor the engine with safety shutdowns for low oil pressure, high engine temperature and over crank. FEATURES • Large, easy-to-read display with 1/2" characters • Fault shut downs for Low Oil Pressure, High Water Temperature & Over Crank) • Monitors and displays battery voltage and engine hours • 12VDC • Simple operation (See Spec Sheet & Operating Instructions for details) • Durable, sealed, weather tight enclosure • Manual mode for manual engine start and stop • Sleep mode for minimum current draw • Harnesses are available (Part# 70-0301) Cycle Mode Armed
SET UP Set up is simple. Just select the following parameters. 1) Cycles per Day (# of starts per day) 2) Run Duration (Engine run time) 3) Run Days (Days of week engine is run) 4) Cycle Window (Period of time during day when scheduler is active) Manual Mode (Manual On/Off)
Available Flex Input (Shown configured as Low Oil Pressure alarm)
EXAMPLE (See spec sheet or instructions for Time Table) • 8 starts per day • 30 minute run time • Cycle window = 9:00am to 5:00pm • Operate Monday through Friday only
|
|
Home |Terms of Service | Privacy Policy | Site Map | Phone 330.239.4345
Copyright © 2010 Controls, Inc. All Rights Reserved.
