Control Products and Solutions
Engine, Generator & Equipment Controls
J1939 Engines
Mechanical Engines
J1939 Engines
Mechanical Engines
G SERIES New
J1939 Engines
J1939 Engines
Mechanical Engines
J1939 Marine Engines
J1939 Marine Gensets
Analog to CAN bus
Generator to CAN bus
NEWS
Tier 4 Panels Released
January 2011 - Controls, Inc. has released the C4 product series (engine control) and G4 product series (generator control) for tier 4 engines. Both the C4 and G4 products are based on the uCAN platform and include functionality required for tier 4 engines along with additional features and functions while still adhering to the goals of easy-to-read, simple-to-operate and cost effective.
G Series Product for Gensets is Released
September 2010 - The G3 product series for generator control has been released. When installed with the xCAN-AC module, it provides complete generator and engine monitoring for J1939 engines. Multiple G3 display modules can be installed on an application. The G3 display can show both engine and generator engine together, via alternating screens or individually allowing the operator to select the full-time display option most appropriate for the application. The module also serves as a fault code reader. Generator information available includes volts, amps, hertz (on all three legs), kW, Power Factor, KVAR and Total kwH.
xCAN-AC Module for Gensets is Released
September 2010 - The xCAN-AC module is combined with the G3 display for a complete generator and engine monitoring solution for J1939 engines. The xCAN-AC module takes the generator information collected and communicates it over the J1939 CAN Bus where it is collected by the G3 display module for display and monitoring.
New Control Panel with Gauges Introduced for J1939 Engines
November 2009 - Controls, Inc. introduces new control panel for J1939 engines that includes gauges. The C3-4500 control panel combines the Controls, Inc. uCAN series engine control module with J1939 gauges, a key switch and single connector. Manual and auto start available. See C3-4500 Product Announcement for details.
C3 and CM Series Available with Auto Start
June 2009 - Both the uCAN and iMECH products are available with auto start for applications requiring unattended operation utilizing a simple switched input contact closure. Auto start is designated by adding an "AS" suffix to the end of the part number (Example: C3-2500-AS)
Digital Cycle Timers Released
April 2009 - The Timer Control series is released consisting of the following products:
1) Timer Module - Module provide start and stop signal based on selections.
2) Timer & Engine Module - Module starts, stops and monitors engine based on selections.
3) Fuel Circulation Module - Module starts, stops and monitors fuel circulation based on selections.
CM Series (iMECH) Released
April 2009 - The iMECH series module for mechanical engines is released extending the company's product range for all engines to the most basic, mainstream applications. As with the uCAN series for J1939 engines, the iMECH is a robust, yet economical module for mechanical engines with a large display, engine safety shutdowns and a fault event log. Can be provided as a module or as a complete panel with key switch, metal mount and harness.
Integrated Engine/Temperature Control Introduced
March 2009 - Integrated Engine/Temperature control unit introduced. Select the engine start temperature, engine stop temperature and operating speed. Controller is provided with Controls, Inc. designed temperature sender specific to the accuracies required for the temperature zone around 32 degrees F. Controller monitors temperature and starts and stops engine at the selected settings. On engine start, there is a selected warm up engine speed and warm up period. After the warm up period, the engine speed is increased to the selected operating speed. Prior to engine shutdown there is a selected cool down speed and cool down period.
C Series (uCAN) Featured in Diesel Progress Magazine
March 2009 - The uCAN series engine controller for J1939 engines is featured in the March 2009 issue of Diesel Progress Magazine. This product extends the companies product range for J1939 engines Click to see article.
C Series (uCAN) Release
January 2009 - The uCAN series module for J1939 engines is released extending the company's product range for J1939 engines to the most basic, mainstream applications. A robust yet economical module with a large display, throttle control and fault code reader for off-highway and stationary engines. Can be provided as a module or as a complete panel with key switch, metal mount and harness.
EMT Series Featured in Diesel Progress Magazine
December 2008 -The EngineMaster series features showing a pump application with the ability to monitor floats, level transducer or pressure transducer via auto sensing. The controller starts and stops the pump and adjusts engine speed to maintain the required level or pressure. The display alternates between showing engine information and level or pressure information. Click to see article.
Archive
Home | Terms of Service | Privacy Policy | Dealer/Distributor Opportunities
Copyright © 2011 Controls, Inc. All Rights Reserved.