Controls Incorporated - Control Products and Solutions

Control Products and Solutions

Engine, Generator & Equipment Controls

HOME | SERVICE & SUPPORT | CONTACT

C SERIES

J1939 Engines

CM SERIES

Mechanical Engines

EMT3 SERIES

J1939 Engines

EMT1 SERIES

Mechanical Engines

G SERIES New

J1939 Engines

JCAN SERIES

J1939 Engines

GMPLUS SERIES

Mechanical Engines

M SERIES

J1939 Marine Engines

G SERIES

J1939 Marine Gensets

Analog to CAN bus

XCAN-AC

Generator to CAN bus

ENGINE CODES

SAE J1939 PRE ALARM & ALARM CODES

The engine ECU broadcasts SPN.FMI codes along with a yellow or red lamp indication to communicate the engine is running outside of specification. A yellow lamp indicates a pre alarm condition while a red lamp indicates an alarm condition upon which engine derate/shut down occurs.

SPN - Suspect Parameter Number

FMI - Failure Mode Identifier

Example: An SPN of 110 indicates Engine Coolant Temperature is out of specification while the FMI of 03 indicates Engine Coolant Temperature is above normal.

Click for List of Common J1939 SPN.FMI Codes.pdf

Application engineers are available to assist with product selection.

CALL:

330.239.4345

EMAIL:

sales@controlsinc.com

Home | Terms of Service | Privacy Policy | Dealer/Distributor Opportunities