Engine Controllers for J1939 Engines

EngineMaster^TM CONTROL PANEL

MODEL EMT3

Advanced Engine/Equipment Control for J1939 Engines

COMPLETE ENGINE CONTROL

▪ Full Display (Six Parameters)

▪ Engine Start/Stop

▪ Throttle Control

▪ Fault Code Reader

▪ 12 & 24 VDC

FEATURES

▪ Large, Easy-to-Read Display

▪ Simple-to-Operate

▪ Large, Tactile Buttons

▪ Throttle Control Via UP/DOWN Buttons

▪ Robust, Water Tight Enclosure (NEMA 4x)

▪ Flexible Mounting Options

STANDARD PART NUMBERS

▪ Manual Start - P/N EMT3-C10184

▪ Manual/Auto Start - P/N EMT3-C10203

PRODUCT LITERATURE

Spec Sheet

Dimensional Drawing

Display Views

The EMT3 series provides complete engine control for all makes and models of J1939 engines. It is an excellent solution for those looking for a control panel that is simple to operate but also has the sophistication and flexibility to achieve the engine control required for the application.

The EMT3 series is loaded with features and options where the controller can take advantage of today's sophisticated engine ECUs while at the same time providing a simple operator interface for everyday use.

If your application has specific throttle control requirements, has additional inputs that need to be monitored, or requires run, alarm or other output signals to horns, lamps or remote communication or SCADA systems, the EMT3 series has what you need. Also, pressure and level monitoring is available with P/N EMT3-C10203 for applications where pressures or levels need to be monitored and coordinated with engine start & stop and/or throttle control.

Moreover, the EMT3 series includes the ability to monitor pressures or levels that can be coordinated with engine start/stop and/or throttle control. This powerful feature provides engine performance to be matched directly to application requirements.

Engine harnesses available for most engine makes and models. Adapter harnesses also available.

CALL TO DISCUSS YOUR APPLICATION 330.239.4345.

BACK TO HOME

HOME PAGE